A measurable and exploitable carbon advantage

A certified, measured, documented and usable environmental impact, without compromising on industrial performance.
Only 14% of plastics from post-consumer equipment are reused.

Our challenge is to contribute to the decarbonization of the industry by allowing our customers to replace virgin plastic materials from petroleum with regenerated plastic resins.
We transform environmental constraints into a strategic asset for your supply chain.
Decarbonization
Drastically reduce the carbon footprint of your products thanks to our regenerated resins that divide your impact by 9 compared to the use of virgin polymers.
Fossil Substitution
Limit the use of fossil resources, thanks to our regenerated resins made from 100% post-consumer equipment (ELV or WEEE).
Data & Reporting
Simplify your CSR audits and your responses to tenders with our carbon economy certificates.
[Durability]
A 100% circular production model.
The Skytech process goes beyond the simple regeneration of material to be part of a virtuous industrial ecosystem. We optimize every resource in our value chain to ensure a high-performance resin with the lowest environmental footprint on the market.
Neutral water impact : thanks to the systematic retreatment on site, the water used in pre-treatment is reinjected into a closed circuit, guaranteeing production without rejection or waste.
Low-carbon production : Skytech sources 100% carbon-free energy, drastically reducing the climate footprint of our resins.
[measurable impact]

Decarbonize the industry.
An alternative to oil.

Replace virgin petroleum-based materials with a clean alternative, without technical compromise.
arrow rightarrow right
Our expertise
5.5x
less CO₂ emissions compared to virgin plastic.
7x
fewer fossil resources are used for your products.
Carbon economy certificates for each customer.
[compliance & finance]
Carbon economy certificates on request.
A sustainable solution, in accordance with European requirements, which optimizes the economic equation of your industrial projects while simplifying your reporting.
Optimized profitability : enhance your use of regenerated materials via incentive mechanisms (IMPR) and regulatory levers to maximize the ROI of your projects.
Normative Anticipation : secure your investments in the face of legal changes with our solutions designed to anticipate future environmental standards.
Increased competitiveness : use our carbon certificates and certified data to strengthen your CSR balances and gain power by responding to demanding tenders.
[TECHNICAL SUPPORT]
A question?
If you can't find the answer in this list, our experts are at your disposal. Contact us to discuss your needs in more detail or to clarify the specificities of our resins.
arrow rightarrow right
Talk to an expert
What is the environmental impact of regenerated plastic compared to virgin plastic?
arrow up
The use of our resins allows a drastic reduction in the carbon footprint, often divided by 9 compared to a virgin material derived from oil. By reusing existing deposits, we avoid the extraction of fossil resources and extremely energy-intensive refining processes. For manufacturers, integrating Skytech solutions is the most direct way to decarbonize their products while preserving natural resources.
How does Skytech contribute concretely to the circular economy?
arrow up
We transform an end-of-life materials management problem into a strategic resource solution. We recover complex plastics from end-of-life vehicles (ELVs) and electrical equipment (WEEE), of which less than 10% are reused today. Our technology makes it possible to reinject these materials into new high-performance production cycles, thus avoiding burial or incineration.
How do you guarantee the traceability and purity of your materials?
arrow up
Trust is based on total transparency. We ensure complete traceability of our flows, from the rigorous selection of our WEEE and ELV suppliers to the final batch. Our industrial process meets extremely strict compliance specifications and is subject to an annual audit via RecyClass certification. This international certification attests to the origin, transparency and circular reality of each ton produced.
What is the core mission of Skytech?
arrow up
Our mission is to prove that industrial performance can be sustainable. Faced with the climate challenge, we are helping companies to massively replace fossil plastic with premium regenerated material. Thanks to our patented technologies, we are co-building tailor-made alternatives with our customers so that tomorrow, a coffee machine can naturally be reborn in the form of a bumper, a technical component or a vacuum cleaner shell.
What are the pillars of your quality approach?
arrow up
For Skytech, quality is not an option, it's a contractual guarantee. Each manufacturing batch is systematically sampled and analyzed in our laboratories to guarantee a purity level of 99%. We rigorously control:
• Physical properties: Fluidity index (MFI), density and load rate.
• Mechanical resistance: Tensile tests, flexure tests and impact tests (Charpy and Izod).
• Health security: X-ray fluorescence analysis to ensure the absence of heavy metals (RoHS Directive).
Each delivery is accompanied by a certificate of conformity, attesting to the stability and homogeneity of the material.
[Contact us]
Get started with Skytech
Decarbonize your industry by integrating our premium resins with performances identical to virgin plastic. Reconcile your production requirements with your low-carbon chemistry ambitions.
MAKE AN APPOINTMENT
MAKE AN APPOINTMENT
Decarbonize industry without compromising on performance thanks to our high-precision regenerated resins.
Make an appointment
Make an appointment
WelcomeOur productsOur customersOur supportOur commitments
AboutblogContactJoin us
Legal information

Legal notices


Credit

You are currently connected to the site www.skytechslp.com of the company SKYTECH SAS (named SKYTECH below), whose head office is located: Rue Louis Bleriot, Le Val d'Hazey (27600) .Tel: +33 (0) 2 79 49 03 05 — Email: contact@skytechslp.com — Email: — Siret: 843 152 406 00016VAT: FR 64 843152406A through this page, SKYTECH is committed to respecting trust that you give him.Director of the publication & Responsible for the publication: F. DELAVAL

Limitations of liability‍

SKYTECH & its agency My Market Office have prepared the content of this site with care and technicality. SKYTECH strives to ensure the accuracy and updating of the information published on the site to the best of its ability and reserves the right to modify its content at any time. Therefore, the information and visuals disseminated are exclusively informative and cannot in any way constitute a contractual document that can be used as a basis for legal action.Skytech SARL cannot be held responsible for any direct or indirect damage — regardless of the cause, origin, nature and consequences — resulting from access to the site, its use or the impossibility of accessing it, as well as for any damage to users' equipment.

Intellectual property & counterfeits

The entire site, and each of its elements taken separately, constitute a protected work and fall under French and international legislation on copyright and intellectual property. No commercial exploitation, reproduction, representation, use, adaptation, modification, incorporation, translation, modification, incorporation, translation, integration, translation, translation, marketing, commercialization, partial or complete, marketing, partial or complete of the elements of this site, is subject to the prior authorization of Skytech.Violation of this intellectual and/or industrial property right is a punishable offense of counterfeiting. Of a sentence of 2 years in prison and a fine of 150,000 euros.

Personal data management

In France, personal data is in particular protected by law no. 78-87 of 6 January 1978, law no. 2004-801 of 6 August 2004, article L. 226-13 of the Criminal Code and the European Directive of 24 October 1995.

In accordance with the provisions of articles 38 and following of Law 78-17 of January 6, 1978 relating to information technology, files and freedoms, any user has the right to access, rectify and oppose personal data concerning him, by making a written and signed request, accompanied by a copy of the identity document with the signature of the holder of the document, by specifying the address to which the response must be sent.

In addition, this section explains how we collect, use, and process your personal data, and how, in doing so, we comply with our legal obligations to you. We value your privacy and are committed to protecting and maintaining your data privacy rights and complying with applicable data protection legislation (including but not limited to the General Data Protection Regulation (Regulation (EU) 2016/679) (the “GDPR”).

This section applies to the personal data of users of our website. It is important to note that we may need to change this section. Please check this page regularly for any changes we may post.

We collect certain personal data from users of our website in order to improve your use of our site and to manage the services we provide. This information may include how you use our website, how often you access it, and when our site is visited the most. A certain amount of personal data that we collect from you is essential for us in order to be able to perform our contractual obligations towards you or with respect to third parties.

Depending on the type of personal data and the reasons for which we process it, if you refuse to provide it to us, it is possible that we will not be able to meet our contractual obligations or, in extreme cases, to continue our relationship with you.

Protecting your information is very important to us. Therefore, we have put in place appropriate measures to prevent unauthorised access to and misuse of your personal data.

Although we are in possession of your personal data, you have certain rights over it. For more information please contact us. We will try to process your request as soon as possible, and in any case in accordance with the requirements of current legislation. Please note that we may keep a record of your communications in order to help us resolve any issues you raise.

Right to object

If we use your data because we believe it is necessary for the purposes of our legitimate interests and you do not consent to it, you have the right to object. We will respond to your request within 30 days (although we may extend this period in some cases). Generally, we may refuse your request subject to certain conditions.

Right to withdraw consent: where we have obtained your consent to the processing of your personal data for certain activities or your consent for us to promote to you, you can withdraw your consent at any time.

Right to erasure: in certain situations, you have the right to ask us to “erase” your personal data. We will respond to your request within 30 days (although we may be entitled to extend this period in some cases) and we will only be able to object if certain conditions apply. If we agree to your request, we will delete your data, but we will generally assume that you would prefer us to include your name in our register of people who do not want to be contacted. In this way, we will reduce the likelihood that you will be contacted if your data is collected in other circumstances. If you prefer that we do not do this, you are free to let us know.

Right to file a complaint with a supervisory authority: you also have the right to file a complaint with your local supervisory authority.

In any event, SKYTECH only collects personal information about the user for the need of certain services offered by the site www.skytechslp.comThe user provides this information with full knowledge of the facts, in particular when he enters it himself. It is then specified to the user of the site www.skytechslp.com the obligation or not to provide this information.

No personal information of the user of the site www.skytechslp.com is published without the user's knowledge, exchanged, transferred, assigned or sold on any medium to third parties. The site is not declared to the CNIL.

Cookies

We collect your data automatically using cookies when you visit our website, depending on your browser settings for the use of cookies or the data you fill in on our contact form.

We do not share the data we collect about you with third parties without your prior consent.

“Cookies” are small data files that are stored on your computer's hard drive. Almost all websites use them and they don't damage your system. We use them to track your activity to ensure that your visit to our site goes as smoothly as possible. We may use information extracted from cookies to ensure that we provide you with options tailored to your preferences the next time you visit. We may also use cookies to analyze traffic and for advertising purposes.

If you want to check or change the types of cookies you accept, you can usually do so by changing your browser settings.

Most web browsers will accept cookies. However, if you prefer that we do not collect data in this way, you can choose to accept all or some cookies or to refuse them in your browser's privacy settings. However, by refusing all cookies, you may not be able to take full advantage of all the features of our site. Each browser is different, we invite you to consult the “Help” menu of your browser to find out how to change your cookie preferences.

Hypertext links

The establishment of a hypertext link to this site requires prior written authorization from Skytech. These links are in no way under the control of SKYTECH, which cannot be held responsible for sites (content and use) that have a hypertext link to its own site.

Copyright & copyright

All rights of use reserved to SkytechModifications, Interruptions, and Termination: Skytech is entitled, at its sole discretion, to add, remove, or modify at any time all or part of the services included in the website, to discontinue it temporarily, or to terminate this license. The legal notices can also be modified or adapted at any time. You are invited to consult and respect them without reservation.

Applicable law & attribution of jurisdiction

Any dispute in connection with the use of this site is subject to French law. Exclusive jurisdiction is granted to the competent courts of Paris.The main laws concernedLaw No. 78-17 of January 6, 1978, in particular amended by Law No. 2004-801 of August 6, 2004 relating to computers, files and liberties.Law No. 2004-575 of June 21, 2004 for confidence in the digital economy.

Lexicon

User: Internet user connecting, using the site above.Personal information: “information that allows, in any form whatsoever, directly or not, the identification of the natural persons to whom they apply” (article 4 of law No. 78-17 of January 6, 1978).
Close